CNSL
MORTAR :-
—————————————————————————————————————— |
° |
INTRODUCTION:
This is a two -part chemical setting CNSL base mortar
used for acid resisting brick lining, to protect most
commonly used construction materials like RCC, MS, steel,
brick masonry construction etc., from corrosive environment
in modern chemical age. CNSL is resistant to acids,
alkalis, and solvents, etc. at
temperature upto 170 C.
|
| ° |
AREA
OF APPLICATION:
CNSL is used
for acid resistant brick/tile lining where
maximum chemical resistance is required at most
economical cost. CNSL is most inexpensive
among other resin base mortar, but at the same
time is most suitable material also.
|
| ° |
PHYSICAL PROPERTIES:
| Color |
Black |
Mix Ratio by wt. Sol to
Powder |
1.3 |
| Compressive Strength kg/cm2 |
100Kg |
| Flexural Strength kg/cm2 |
30 |
| Bond Strength kg/cm2 |
4 |
| Water Absorption |
1%by wt. |
| Max. Temp. |
170 C |
| Setting Time |
18-24 Hrs. |
|
| ° |
METHOD
OF APPICATION MIXING:
CNSL is prepared by mixing of
solution & powder to form a workable mortar.
Mixing ratio is 1 part solution to 3 parts powder
by wt. This ratio can vary depending upon
ambient temperature and working conditions. Use
clean, dry mixing pan. Take required quantity of
solution and add powder slowly and start mixing
to get uniform paste like mortar. Do not mix large
quantity, and then can be used within 20-30
minutes.
|
| ° |
APPLICATION:
Ensure bricks or tiles are clean, dry and kept at the
same temperature of CNSL. Apply mixed mortar on brick/tile
in Even thickness on all sides for bedding & jointing
with the same materials. Apply little more in
center so no air pockets are formed while its installation.
For only joints filling, it is recommended to take great
care that full depth is filled with the same. During
& after completion of the application, the area
must be kept dry and free from and other materials and
traffic, which can affect setting & curing of CNSL.
|
| ° |
CHEMICAL RESISTANCE:
CNSL will
provide very good protection against most acids,
alkali solvents, oil, fats, salts etc. However it is
not recommended for protection against HF,
fluoride salts etc.
|
| ° |
STORAGE & SHELF
LIFE:
Always keep
solution & powder in cool, dry place, away from
direct sunlight and moisture. If stored in sealed
container and bags, shelf life of solution will be
12 months, and shelf life of powder will be 4-5
months.
|
| ° |
PACKING Solution:
25
kgs and 200 kgs (NET)
in good quality MS drums. Powder: 37.5 kgs
(NET) in LDPE+HDPE bags.
|
| ° |
HEALTH & SAFETY:
it is advisable to wear protective wears at the time
of use of CNSL and all other our products. In case of
contact with skin and eyes, wash with plenty of water
and consult a doctor. This information, given above
in good faith, is based on results gained from experience
and tests. However, all recommendations or suggestions
are made without guarantee since the conditions of use
are beyond our control. |
| |
|
