 |
|
|
|
|
|
 |
| |
| » EPOXY
FLOORS |
| |
|
EPOXY
COATING :-
|
° |
INTRODUCTION:
EPOXY COATING (HYB) is a two part high solids solvent
free epoxy phenolic resin based coating system designed
for hard wearing, smooth surface finish for floors,
walls and on steel structures. Nonskid surface finish
can be achieved on floor, if required.
|
| ° |
FEATURES:
1) Hard Wearing
2) Non Dusting
3) Excellent Surface Finish
4) Non Smelling
5) Good Aesthetics
6) Highly Chemical Resistant
|
| ° |
APPLICATION:
1.Stir well before mixing Part A and Part B and
mix in the prescribed ratio.
2.Apply one coat of EPOXY primer on the clean and dry
surface.
3.EPOXY COATING (HYB) should be applied on the surface
by brush or roller within 24 hrs. After application
of primer coat it should be allowed to air dry for min.
4 hrs. Preferable in a dust free atmosphere.
4.Apply min. 2 coats with the intercoat interval of
6-8 hrs.
|
| ° |
PRODUCT
SPECIFICATIONS:
| Application |
Brush, Roller |
| Mixing Ratio |
As Directed on Packing |
| Pot Life |
30 Mins. |
| Drying Time |
Touch Dry- 30 Min, Hard Dry
–
6 Hrs. |
| Intercoat
Interval |
6-8 Hrs. Min. |
| Dry Film
Thickness |
125-150 Microns/per coat
depending on porosity |
| Covering
Capacity |
6-8 sq.met/kg per coat
depending on porosity,
roughness & method of
application. |
| Color Shades |
All Standard Shades |
|
| ° |
RECOMMENDED
USES:
1) Food & Pharmaceutical
2) Work Shop
3) Clean Room Application
4) Chemical Resistant Coating for Concrete& Steel
5) Petrochemical, Fertilizer plants
|
| ° |
METHOD
OF APPLICATION:
SURFACE PREPARATION
The long-term durability of the applied Epoxy coating
(HYB) epoxy coating is dependent on the adhesion between
sub-base and coating material. It is most important
therefore, that the substrate surfaces are correctly
prepared prior to application.
1.Before application of the Epoxy coating (HYB) surface
should be free from loose partials, rust, oils, grease
or earlier coatings and should be totally dry.
2.New concrete or cementations surface should be placed
at least 28 days and have a moisture content of less
than 5% before application of Epoxy coating (HYB)
3.After surface is dry, all repair work like sealing
of joints, cracks filling of cavities and crevices
should be carried out.
|
| ° |
HEALTH & SAFETY:
Keep the containers tightly closed when not in use.
Avoid contact with skin & eyes. It comes in
contact with the body, wash affected parts with
plenty of water and contact a doctor.
|
|
|
|
| Other known sector for
Epoxy coating, Epoxy floor coating, Epoxy garage floor coating, Epoxy powder coating, Concrete epoxy coating, Epoxy garage coating, Concrete floor epoxy coating, Epoxy pipe coating, Coating epoxy floor garage quikrete, Atlanta coating epoxy,
Marine epoxy coating, Coating epoxy floor part, Basement coating epoxy floor shield, Coating concrete epoxy louisiana, Coating epoxy floor garage training, Epoxy coating manufacturer, Coating concrete epoxy oregon, Chip coating color epoxy floor, Coating concrete epoxy massachusetts, Aviation coating epoxy interior, India |
| |
|
|
|
We Undertake Contracts For Complete Epoxy Flooring & Coating System for Effluent Treatment Plant, Battery Charging Room, Acid Storage Yard, Neutralize Tank, Neutralizer Tank, Acid Collection Tank, Chemicals Reaction Vessel, Chemicals Storage Vessel, Drainage Systems, Process Floor Area, Auto Cleave vessels, Salphoneter vessels, Isolator vessels, Holding vessels, Nit reactor vessels, Mesuring Tank Etc.
